Particle Concentration: 0.1% w/v Preservative: 0.01% MP40 and 0.02% Sodium Azide
Storage: Below 30°C. Refrigeration is usually not required. CAUTION: DO NOT FREEZE.
Note: Before use, resuspend by vortexing. To achieve optimum particle suspension, briefly sonicate the reagent after vortex mixing.
Cat. No. | Lid Colour | Qty | Particle size distribution analysis | |||
Nominal | Mean | Standard deviation | C.V | |||
SL‐001S | White | 5ml | 0.1µm | 0.095µm | 0.0023 | 2.4% |
SL‐003S | Blue | 5ml | 0.3µm | 0.31µm | 0.0074 | 2.4% |
SL‐005S | Green | 5ml | 0.5µm | 0.53µm | 0.0125 | 2.4% |
SL‐008S | Yellow | 5ml | 0.8µm | 0.82µm | 0.0192 | 2.4% |
SL‐010M | White | 5ml | 1.0µm | 1.0µm | 0.024 | 2.4% |
SL‐020M | Blue | 5ml | 2.0µm | 2.38µm | 0.057 | 2.4% |
SL‐030M | Green | 5ml | 3.0µm | 3.17µm | ||
SL‐050M | Yellow | 5ml | 5.0µm | 5.26µm | ||
SL‐080L | White | 4ml | 8.0µm | 7.9µm | ||
SL‐100L | Blue | 3ml | 10.0µm | 10.0µm | ||
SL‐150L | Green | 2.5ml | 15.0µm | 15.5µm | ||
SL‐200L | Yellow | 2ml | 20.0µm | 20.1µm |
*WARNING: Sodium Azide Cu react with Cu and Pb in plumbing to form explosive metal azides. Flush this reagent down drains with copious amounts of water.
NOTE: FOR RESEARCH APPLICATIONS ONLY. NOT FOR DIAGNOSTIC USE.
SL‐001S ‐ SL‐5L ‐ Latex Calibration Particles
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article