Latex Flow Cytometry Particles 0.1%

Created by Kathleen Patrick, Modified on Mon, 2 Dec at 1:38 PM by Kathleen Patrick

Particle Concentration: 0.1% w/v Preservative: 0.01% MP40 and 0.02% Sodium Azide

Storage: Below 30°C. Refrigeration is usually not required.

CAUTION: DO NOT FREEZE.

Note: Before use, resuspend by vortexing. To achieve optimum particle suspension, briefly sonicate the reagent after vortex mixing.

Code	Lid Colour	Qty	Particle size distribution analysis
Code	Lid Colour	Qty	Nominal	Mean	Standard deviation	C.V
SL‐001S	White	5ml	0.1µm	0.095µm	0.0023	2.4%
SL‐003S	Blue	5ml	0.3µm	0.31µm	0.0074	2.4%
SL‐005S	Green	5ml	0.5µm	0.53µm	0.0125	2.4%
SL‐008S	Yellow	5ml	0.8µm	0.82µm	0.0192	2.4%
SL‐010M	White	5ml	1.0µm	1.0µm	0.024	2.4%
SL‐020M	Blue	5ml	2.0µm	2.38µm	0.057	2.4%
SL‐030M	Green	5ml	3.0µm	3.17µm
SL‐050M	Yellow	5ml	5.0µm	5.26µm
SL‐080L	White	4ml	8.0µm	7.9µm
SL‐100L	Blue	3ml	10.0µm	10.0µm
SL‐150L	Green	2.5ml	15.0µm	15.5µm
SL‐200L	Yellow	2ml	20.0µm	20.1µm

*WARNING: Sodium Azide Cu react with Cu and Pb in plumbing to form explosive metal azides. Flush this reagent down drains with copious amounts of water.

NOTE: FOR RESEARCH APPLICATIONS ONLY. NOT FOR DIAGNOSTIC USE.

SL‐001S ‐ SL‐5L ‐ Latex Calibration Particles