Product Information

User notes - ID310 Aqua-Hold Pap Pen
Intended use: The Aqua-Hold pap pen is a special marking pen that provides a thin film-like barrier when a circle is drawn around the specimen. This barr...
Thu, 13 Aug, 2020 at 1:42 PM
BioWave FAQ
How do I achieve wattages below 250W? Full instructions on changing the wattage are in the section 'Wattage Adjustment/Calibration' of the manu...
Mon, 27 May, 2019 at 1:39 PM
Borosilicate Glass - Information, properties and data for borosilicate glass
Borosilicate glass is produced mainly using silica and boron oxide. Borosilicate glasses are known for having very low coefficients of thermal expansion (~3...
Fri, 24 May, 2019 at 4:30 PM
C-Chip Counting Chamber
With the C-Chip counting chamber, cells are counted in the same way as with the Neubauer "improved" counting chamber, but there is a smaller risk...
Fri, 24 May, 2019 at 3:02 PM
User notes - C020 & C0205 Sodium Cacodylate Trihydrate
Sodium cacodylate trihydrate is the most favoured buffering vehicle used with fixatives in specimen preparation for electron microscopy. Also called cacodyl...
Thu, 13 Aug, 2020 at 2:46 PM
User notes - IAF Citifluor™ Anti-fadent
  IAF is a range of immersion oils containing an anti-fadent and should be used in the same way as any other immersion oil.    Do clean the lens of the ...
Thu, 13 Aug, 2020 at 2:00 PM
MetroChip microscope calibration target - Cleaning procedure
Metro Chip Cleaning Procedure The cleaning procedure largely depends on the nature of the contamination and what facilities are available at your site. L...
Tue, 10 Aug, 2021 at 1:30 PM
User Notes - IM032 -Clear Mount Aqueous Mounting Medium
Clear-Mount A direct substitute for Biomeda™ Crystal/Mount Description Clear-Mount medium is an aqueous mounting medium designed for permanent mounting ...
Thu, 13 Aug, 2020 at 2:15 PM
Copper Finder Grids
Rows are labelled alphabetically, both on the rim of the grid and at the corners of each of the cells. To index the location of a specimen for later, or f...
Fri, 24 May, 2019 at 7:35 PM
Coverglass Technical Information
KNITTEL Coverglass is made of a colourless borosilicate glass (D 263) with an optimum hydrolytic resistance HGB1. This ultra thin glass is produced by onl...
Mon, 27 May, 2019 at 1:41 PM