Fluoro-Gel with DABCO™

Description

Fluoro‐Gel with antifading agent 1,4‐Diazobicyclo‐(2,2,2)‐octane (DABCO™) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4°C in the dark.

Intended use

Immunofluorescence, confocal microscopy.

Reagent

Ready to use mounting medium with anti‐fading agent.

Storage

2‐8°C is recommended. Protect from light, DO NOT FREEZE.

Procedure

1. Bring the vial to room temperature.
2. Rinse slide to be mounted with DISTILLED OR DEIONISED WATER, touch the edges of slide on a paper towel to remove excess water. Place slides on a flat surface away from light.
3. Turn the vial upside down and open the dropper to remove any air bubbles.
4. Apply 3‐4 drops of mounting medium directly on top of the specimen and spread out evenly by tilting slide back and forth or spread evenly with a 0.2 mL plastic pipette tip, making sure the tissue is not touched. Excess medium can be removed by touching the edges of slide against paper towel.
5. Let stand at room temperature for about 5 minutes.
6. Apply cover slip, carefully avoiding air bubbles.
7. The specimen is ready for visualisation under a microscope.
8. One can seal the edges of cover slip with nail polish, any organic medium or our Organo mounting medium. If a coverslip is not sealed air bubbles will appear in a few days.
9. It is recommended that the slide be stored in the dark at 2‐8°C.

Removal of coverslip

Coverslip can be removed before sealing the edges. Soak slide in warm (37°C) distilled or deionised water for several minutes. Carefully and slowly move the coverslip. Soak in water for an additional few minutes to remove coverslip. Rinse slide several times with warm water to remove all mounting medium. The slide can be remounted.

Note: For research use only; not for use in diagnostic procedures. FOR IN VITRO LABORATORY USE ONLY.