Chemicals

Exposure Levels
Six abbreviations are used to describe the administered doses reported in the literature. These terms indicate whether the dose caused death (LD) or other ...
Fri, 24 May, 2019 at 3:04 PM
Fluka Durcupan
Fluka Durcupan, the new embedding agent, opens new roads in the observation of enzymatic digestion processes and for carrying out histochemical investigati...
Fri, 24 May, 2019 at 3:06 PM
Neutralisation & Disposal of Osmium Tetroxide
Introduction A 2% solution of Osmium Tetroxide can be fully neutralised by twice the volume of oil (corn oil is preferred because of its high percentage of...
Fri, 24 May, 2019 at 3:40 PM
Eosin Y Solutions
Prepare eosin Y stock solution. Add 2.0 g of water-soluble eosin Y to 40 mL of double-distilled H2O, and mix until dissolved. Then add 160 mL of 95% ethano...
Fri, 24 May, 2019 at 4:28 PM
Plastic Properties Table
Chemical Resistance of Plastics With regard to chemical stability, plastics are classified as follows: + Very good chemical resistance Within 30 days, co...
Tue, 2 Jul, 2019 at 8:07 PM
LR White: Using LR White for Hard Tissue
A user note for C023, C024, C025, C026, C027.  L.R. White can be used for the microtomy of decalcified bone and teeth and also for microtomy or "sa...
Fri, 24 May, 2019 at 4:10 PM
C023 & C024 LR White Resin for immunocytochemistry
A user note for C023, C024, C025, C026, C027. Sections from L.R. White embedded tissue have been used successfully for immunocytochemistry at both the ligh...
Mon, 20 Sep, 2021 at 9:01 AM
C025 & C026 - LR White embedding kit, Medium and Hard
LR White Resin (1981 is an aromatic acrylic resin mixture which was introduced  following the work by Causton, Gillett and Germain, 1980)– It is a very low ...
Mon, 12 Oct, 2020 at 8:26 AM
C050 - DMAE user note and safety sheet summary
2-Dimethylaminoethanol (DMAE) FLAMMABLE, CORROSIVE Causes burns Harmful by inhalation, in contact with skin and if swallowed. May cause sensitisation ...
Mon, 20 Sep, 2021 at 8:58 AM
SDS - C050 DMAE (DG)
A curing agent for epoxy resins.  DMAE Epoxy accelerator for Spurr's embedding kit.  M.W.89.14  C4H11NO   F.W. 89.14 Specific Gravity: 0.883-0.888 b...
Fri, 15 Oct, 2021 at 10:49 AM