Entellan New, mounting medium DG (EMS)

Created by Nicole Smith, Modified on Wed, 03 Aug 2022 at 08:32 PM by Nicole Smith

Entellan® New is a solution of polymers in xylene.

Uses:

The combination of several synthetic resins makes Entellan® a particularly rapid embedding agent. It can be used for all dehydrated microscopic preparations.

Embedded preparations can be filed for years without changes occurring in their color. Constant properties ensure its high quality.

Properties:

Setting time at room temperature		20 minutes
Intrinsic color		Colourless; absolutely transparent
Neutrality Acid number		<2.50
Refractive Index		nd20 1.490 - 1.500
Refraction to daylight & UV light		not turbid
Heat resistance		up to 90°C
Cold resistance		down to -17°C
Intrinsic fluorescence under UV light		<50ppb quinine sulfate
Indifference to biological stains		not to carmine, sudan III , toluidine
Density 20 o/4°C		0.940 - 0.960
Viscosity @ 20°C		<450cP
Solubility dissolves in		acetone, ether, benzene, chloroform, dioxan, toluene, xylene
Reaction to water		slight; immiscible with water
Loss on drying		about 75%

Use:

Cover the object with drops of Entellan® so that the space between the cover glass and the slide is completely filled. The cover glass must be sealed right up to each edge. Excess embedding agent can be removed with a cloth moistened with xylene.

In the case of histological and cytological preparations, it is recommended that xylene be used as the final stage before embedding, so that turbidities caused by the action of alcohol can be avoided.

As a matter of precaution, we recommend that, as with other embedding agents, all work with Entellan® be carried out in a fume hood or in a well-ventilated room.

Note:

Recap the bottle immediately after use. Should Entellan® become to viscous, it can be brought back to the desired consistency by adding xylene. Store at room temperature