Diamond Knife Washer

Created by Karen Darley, Modified on Mon, 27 May 2019 at 01:16 PM by Ben Peterson

Diamond Knife Washer Instructions

Instructions for use:

  1. Put the knife wash on a Magnetic Stirrer. (make sure there is NO heat)
  2. Fit the Diamond Knife into the holder and tighten the screw making sure that the screw meets the rear of the boat.
  3. Fill the wash to the indicated line with distilled or deionized water (you may add two drops of very mild liquid detergent).
  4. Put the lid on the container (be careful when doing).
  5. Turn the magnetic stirrer on at a low speed for 5 minutes.
  6. Remove lid and take knife out.
  7. If desired and/or you used detergent, rinse the knife with distilled water.
  8. Either let the knife dry naturally or if you prefer you can dry it with a foam rod (polystyrene) dipped in absolute ethanol as usual.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article