TOOL - Diamond Knife Washer

Diamond Knife Washer Instructions

Instructions for use:

1. Put the knife wash on a Magnetic Stirrer. (make sure there is NO heat)
2. Fit the Diamond Knife into the holder and tighten the screw making sure that the screw meets the rear of the boat.
3. Fill the wash to the indicated line with distilled or deionized water (you may add two drops of very mild liquid detergent).
4. Put the lid on the container (be careful when doing).
5. Turn the magnetic stirrer on at a low speed for 5 minutes.
6. Remove lid and take knife out.
7. If desired and/or you used detergent, rinse the knife with distilled water.
8. Either let the knife dry naturally or if you prefer you can dry it with a foam rod (polystyrene) dipped in absolute ethanol as usual.