Starting parameters for capturing images with a ODCM camera
- Open ToupView™ (ScopePhoto™ ScopeTek™) and focus the specimen in the live capture window.
- Select Video Source Property from the Setup menu.
- White Balancetab
- Hold a sheet of white paper under the microscope so that the light source is projected onto it. Click Auto White Balance. The colour temperature will be set to a neutral grey (~20%).
- Exposuretab
- Tick Auto Exposure and click the Default button.
- Colourtab
- Adjust the gamma, saturation, and contrast as desired.
Note: The white balance will not change unless the colour temperature is changed. This can occur when increasing the intensity of a light source, changing the bulb, or using a different microscope. Using the white paper method to achieve a neutral grey will adjust the white balance to different light sources/intensities.
Information:
http://en.wikipedia.org/wiki/Contrast_(vision)
http://en.wikipedia.org/wiki/Exposure_(photography)
http://en.wikipedia.org/wiki/Image_editing
http://en.wikipedia.org/wiki/Dynamic_range
http://en.wikipedia.org/wiki/Gamma_correction
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article